PB-20 Natural Water Bidet

• The most basic cold water bidet
• No electricity or battery needed
• Installation Part included
• 90 days warranty

Installation Instructions:

1. Remove the toilet seat and cover
2. Fix the bidet between the toilet seat and toilet pan, tighten the screws  
3. Close the water valve and then unscrew the toilet hose. Fix the “T”-adapter between
   the toilet hose and the water valve
4. Insert one end of the clear bidet hose into the bidet at least 17mm, and the other
   end into the “T”-adapter at least 17mm
5. Open the water valve and rotate the knob on the bidet to check if the bidet work well